INFO - PLT FED TTCrx OK (PLL ready, dll ready, frame synced)
INFO - Set up PLT FED interface #0, base address = 0x44000000, ID = 34
INFO - Output will be stored in this file: /home/2017ColdBox/cmsplt/interface/calib/pltlevelsfast_calibration_output.txt
INFO - PLTFED channel 0-1 (mFec 7-1 hubAddress 5 roc 1)
INFO -  Levels and [separations]: BLMax: 175.021 [19.5849], 1DC: 243.521 [29.6147], 2DC: 422.042 [25.178], 3DC: 658.938
INFO - PLTFED channel 0-2 (mFec 7-1 hubAddress 5 roc 2)
INFO -  Levels and [separations]: BLMax: 174.812 [16.6348], 1DC: 222.75 [30.7251], 2DC: 353.125 [25.7533], 3DC: 546.375
INFO - PLTFED channel 0-3 (mFec 7-1 hubAddress 5 roc 3)
INFO -  Levels and [separations]: BLMax: 174.938 [0.599654], 1DC: 176.167 [1.04577], 2DC: 178.354 [1.19135], 3DC: 181.083
INFO - Beginning fine timing calibration...
ERROR - Error: ot all fastors are landing in the same bucket.  Either that or there are no fastors!!!
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  1: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  2: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  3: 18
WARN - Something looks not quite right so: writing params files to calib/
WARN - If you want these settings you have to copy them by hand
ERROR: couldn't find conf/params_pltfed34.dat; perhaps the calibration failed? Files will not be moved.
ERROR: pltfed1_id is not set in calibration-configuration.conf; file will not be moved