INFO - PLT FED TTCrx OK (PLL ready, dll ready, frame synced)
INFO - Set up PLT FED interface #0, base address = 0x44000000, ID = 34
INFO - Output will be stored in this file: /home/2017ColdBox/cmsplt/interface/calib/pltlevelsfast_calibration_output.txt
INFO - PLTFED channel 0-1 (mFec 7-1 hubAddress 5 roc 1)
INFO -  Levels and [separations]: BLMax: 168.25 [21.3141], 1DC: 235.146 [28.3771], 2DC: 404.583 [18.88], 3DC: 628.604
INFO - PLTFED channel 0-2 (mFec 7-1 hubAddress 5 roc 2)
INFO -  Levels and [separations]: BLMax: 169.833 [16.1249], 1DC: 214.667 [23.3682], 2DC: 338.021 [20.4544], 3DC: 516.958
INFO - PLTFED channel 0-3 (mFec 7-1 hubAddress 5 roc 3)
INFO -  Levels and [separations]: BLMax: 173.5 [18.6305], 1DC: 220.646 [31.9846], 2DC: 314.292 [33.2727], 3DC: 440.312
INFO - PLTFED channel 0-4 (mFec 7-1 hubAddress 13 roc 1)
INFO -  Levels and [separations]: BLMax: 171.625 [55.8148], 1DC: 293.792 [68.1748], 2DC: 536.75 [163.638], 3DC: 1023
INFO - PLTFED channel 0-5 (mFec 7-1 hubAddress 13 roc 2)
INFO -  Levels and [separations]: BLMax: 169.562 [47.1193], 1DC: 276.104 [76.9064], 2DC: 489.583 [239.231], 3DC: 1023
INFO - PLTFED channel 0-6 (mFec 7-1 hubAddress 13 roc 3)
INFO -  Levels and [separations]: BLMax: 172.833 [8.77076], 1DC: 194.979 [17.0552], 2DC: 239.958 [50.2168], 3DC: 388.125
INFO - PLTFED channel 0-10 (mFec 7-1 hubAddress 21 roc 1)
INFO -  Levels and [separations]: BLMax: 173.125 [22.9361], 1DC: 224.979 [18.3542], 2DC: 305.958 [12.1713], 3DC: 448.75
INFO - PLTFED channel 0-11 (mFec 7-1 hubAddress 21 roc 2)
INFO -  Levels and [separations]: BLMax: 171.292 [22.3354], 1DC: 263.417 [20.48], 2DC: 408.875 [10.3587], 3DC: 575.812
INFO - PLTFED channel 0-12 (mFec 7-1 hubAddress 21 roc 3)
INFO -  Levels and [separations]: BLMax: 171.521 [38.4077], 1DC: 283.188 [28.5193], 2DC: 463.042 [16.4543], 3DC: 726.667
INFO - PLTFED channel 0-13 (mFec 7-1 hubAddress 29 roc 1)
INFO -  Levels and [separations]: BLMax: 175.146 [43.2295], 1DC: 279.229 [70.361], 2DC: 487.333 [230.122], 3DC: 1023
INFO - PLTFED channel 0-14 (mFec 7-1 hubAddress 29 roc 2)
INFO -  Levels and [separations]: BLMax: 175.188 [59.7263], 1DC: 331.062 [73.3776], 2DC: 655.229 [96.0906], 3DC: 1023
INFO - PLTFED channel 0-15 (mFec 7-1 hubAddress 29 roc 3)
INFO -  Levels and [separations]: BLMax: 172.708 [44.5147], 1DC: 289.75 [65.1852], 2DC: 553.25 [131.147], 3DC: 1023
INFO - Beginning fine timing calibration...
INFO - Timing calibration successful, all fastors are in bucket 11
INFO - Looks okay to me, writing params files to conf/
`conf/params_pltfed0.dat' -> `calib/params_pltfed0.dat'
`conf/params_pltfed34.dat' -> `conf/params_pltfed0.dat'
New settings saved in conf/params_pltfed0.dat and old settings saved in calib/params_pltfed0.dat.
ERROR: pltfed1_id is not set in calibration-configuration.conf; file will not be moved