INFO - PLT FED TTCrx OK (PLL ready, dll ready, frame synced)
INFO - Set up PLT FED interface #0, base address = 0x44000000, ID = 34
INFO - Output will be stored in this file: /home/2017ColdBox/cmsplt/interface/calib/pltlevelsfast_calibration_output.txt
INFO - PLTFED channel 0-1 (mFec 7-1 hubAddress 5 roc 1)
INFO -  Levels and [separations]: BLMax: 172.208 [23.3574], 1DC: 237.646 [26.4609], 2DC: 406.667 [20.4324], 3DC: 631.875
INFO - PLTFED channel 0-2 (mFec 7-1 hubAddress 5 roc 2)
INFO -  Levels and [separations]: BLMax: 173.583 [15.1531], 1DC: 219.104 [24.9001], 2DC: 342.271 [22.3343], 3DC: 526.542
INFO - PLTFED channel 0-3 (mFec 7-1 hubAddress 5 roc 3)
INFO -  Levels and [separations]: BLMax: 174.812 [0.126119], 1DC: 175.125 [1.6736], 2DC: 179.083 [1.21042], 3DC: 181.646
INFO - Beginning fine timing calibration...
ERROR - Error: ot all fastors are landing in the same bucket.  Either that or there are no fastors!!!
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  1: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  2: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  3: 16
WARN - Something looks not quite right so: writing params files to calib/
WARN - If you want these settings you have to copy them by hand
ERROR: couldn't find conf/params_pltfed34.dat; perhaps the calibration failed? Files will not be moved.
ERROR: pltfed1_id is not set in calibration-configuration.conf; file will not be moved