INFO - PLT FED TTCrx OK (PLL ready, dll ready, frame synced)
INFO - Set up PLT FED interface #0, base address = 0x44000000, ID = 34
INFO - Output will be stored in this file: /home/2017ColdBox/cmsplt/interface/calib/pltlevelsfast_calibration_output.txt
INFO - PLTFED channel 0-1 (mFec 7-1 hubAddress 5 roc 1)
INFO -  Levels and [separations]: BLMax: 181.438 [7.50858], 1DC: 216.125 [20.5167], 2DC: 311.479 [21.4012], 3DC: 439.417
INFO - PLTFED channel 0-2 (mFec 7-1 hubAddress 5 roc 2)
INFO -  Levels and [separations]: BLMax: 160.583 [14.0688], 1DC: 191.542 [29.0634], 2DC: 275.458 [28.9402], 3DC: 403.208
INFO - PLTFED channel 0-3 (mFec 7-1 hubAddress 5 roc 3)
INFO -  Levels and [separations]: BLMax: 127.188 [11.7851], 1DC: 147.729 [7.51356], 2DC: 162.625 [5.30355], 3DC: 173.833
INFO - PLTFED channel 0-4 (mFec 7-1 hubAddress 13 roc 1)
INFO -  Levels and [separations]: BLMax: 160.979 [37.1604], 1DC: 234.062 [66.761], 2DC: 398.958 [63.1608], 3DC: 872.5
INFO - PLTFED channel 0-5 (mFec 7-1 hubAddress 13 roc 2)
INFO -  Levels and [separations]: BLMax: 160.354 [20.2515], 1DC: 221.75 [38.9435], 2DC: 362.583 [103.403], 3DC: 876.583
INFO - PLTFED channel 0-6 (mFec 7-1 hubAddress 13 roc 3)
INFO -  Levels and [separations]: BLMax: 163.125 [28.8911], 1DC: 223.5 [57.333], 2DC: 369.292 [162.336], 3DC: 912.667
INFO - PLTFED channel 0-10 (mFec 7-1 hubAddress 21 roc 1)
INFO -  Levels and [separations]: BLMax: 159.521 [1.18069], 1DC: 187.354 [13.4503], 2DC: 236.479 [14.7668], 3DC: 356.396
INFO - PLTFED channel 0-11 (mFec 7-1 hubAddress 21 roc 2)
INFO -  Levels and [separations]: BLMax: 164.729 [10.1232], 1DC: 205.729 [13.2986], 2DC: 269.771 [13.8031], 3DC: 409.979
INFO - PLTFED channel 0-12 (mFec 7-1 hubAddress 21 roc 3)
INFO -  Levels and [separations]: BLMax: 166.646 [20.6257], 1DC: 216.062 [21.5505], 2DC: 304.562 [12.1384], 3DC: 433.917
INFO - PLTFED channel 0-13 (mFec 7-1 hubAddress 29 roc 1)
INFO -  Levels and [separations]: BLMax: 168.667 [28.0742], 1DC: 234.312 [56.5715], 2DC: 388.938 [169.938], 3DC: 906.958
INFO - PLTFED channel 0-14 (mFec 7-1 hubAddress 29 roc 2)
INFO -  Levels and [separations]: BLMax: 172.667 [22.8656], 1DC: 251.604 [53.8318], 2DC: 439.917 [88.4957], 3DC: 833.5
INFO - PLTFED channel 0-15 (mFec 7-1 hubAddress 29 roc 3)
INFO -  Levels and [separations]: BLMax: 173.208 [15.3036], 1DC: 229.5 [28.5983], 2DC: 368.812 [65.6257], 3DC: 991.042
INFO - Beginning fine timing calibration...
ERROR - Error: ot all fastors are landing in the same bucket.  Either that or there are no fastors!!!
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  1: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  2: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  3: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  4: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  5: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  6: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 10: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 11: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 12: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 13: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 14: 10
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 15: 10
WARN - Something looks not quite right so: writing params files to calib/
WARN - If you want these settings you have to copy them by hand
ERROR: couldn't find conf/params_pltfed34.dat; perhaps the calibration failed? Files will not be moved.
ERROR: pltfed1_id is not set in calibration-configuration.conf; file will not be moved