INFO - PLT FED TTCrx OK (PLL ready, dll ready, frame synced)
INFO - Set up PLT FED interface #0, base address = 0x44000000, ID = 34
INFO - Output will be stored in this file: /home/2017ColdBox/cmsplt/interface/calib/pltlevelsfast_calibration_output.txt
INFO - PLTFED channel 0-1 (mFec 7-1 hubAddress 5 roc 1)
INFO -  Levels and [separations]: BLMax: 166.938 [12.7586], 1DC: 207.146 [22.5538], 2DC: 308.729 [20.1278], 3DC: 440.917
INFO - PLTFED channel 0-2 (mFec 7-1 hubAddress 5 roc 2)
INFO -  Levels and [separations]: BLMax: 169.667 [14.7783], 1DC: 203.521 [29.1608], 2DC: 294.25 [24.6655], 3DC: 427.854
INFO - PLTFED channel 0-3 (mFec 7-1 hubAddress 5 roc 3)
INFO -  Levels and [separations]: BLMax: 177.938 [0.155561], 1DC: 178.312 [0.801083], 2DC: 180.354 [0.77662], 3DC: 182.375
INFO - PLTFED channel 0-4 (mFec 7-1 hubAddress 13 roc 1)
INFO -  Levels and [separations]: BLMax: 171.688 [43.6073], 1DC: 279.188 [69.0709], 2DC: 500.833 [60.5457], 3DC: 1018.81
INFO - PLTFED channel 0-5 (mFec 7-1 hubAddress 13 roc 2)
INFO -  Levels and [separations]: BLMax: 169.917 [40.0136], 1DC: 266.438 [72.6041], 2DC: 465.354 [272.394], 3DC: 1023
INFO - PLTFED channel 0-6 (mFec 7-1 hubAddress 13 roc 3)
INFO -  Levels and [separations]: BLMax: 172.125 [45.0101], 1DC: 268 [67.3434], 2DC: 474.396 [217.333], 3DC: 1023
INFO - PLTFED channel 0-10 (mFec 7-1 hubAddress 21 roc 1)
INFO -  Levels and [separations]: BLMax: 172.896 [19.8111], 1DC: 225.083 [17.1575], 2DC: 307.354 [14.2193], 3DC: 453.25
INFO - PLTFED channel 0-11 (mFec 7-1 hubAddress 21 roc 2)
INFO -  Levels and [separations]: BLMax: 172.875 [26.6617], 1DC: 249.792 [18.8912], 2DC: 372.875 [10.3399], 3DC: 517.438
INFO - PLTFED channel 0-12 (mFec 7-1 hubAddress 21 roc 3)
INFO -  Levels and [separations]: BLMax: 173.958 [38.0044], 1DC: 268.875 [25.2171], 2DC: 423.854 [13.2846], 3DC: 646.646
INFO - PLTFED channel 0-13 (mFec 7-1 hubAddress 29 roc 1)
INFO -  Levels and [separations]: BLMax: 174.792 [32.3606], 1DC: 258.021 [55.6724], 2DC: 430.438 [141.249], 3DC: 950.354
INFO - PLTFED channel 0-14 (mFec 7-1 hubAddress 29 roc 2)
INFO -  Levels and [separations]: BLMax: 174.688 [34.3589], 1DC: 293.875 [66.5689], 2DC: 547.188 [92.5584], 3DC: 1006.42
INFO - PLTFED channel 0-15 (mFec 7-1 hubAddress 29 roc 3)
INFO -  Levels and [separations]: BLMax: 175.562 [36.8542], 1DC: 276.25 [61.4087], 2DC: 504.938 [161.637], 3DC: 1023
INFO - Beginning fine timing calibration...
ERROR - Error: ot all fastors are landing in the same bucket.  Either that or there are no fastors!!!
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  1: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  2: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  3: 17
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  4: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  5: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel  6: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 10: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 11: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 12: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 13: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 14: 11
INFO - MaxBucket after adjustment for pltFedId 0 pltFedChannel 15: 11
WARN - Something looks not quite right so: writing params files to calib/
WARN - If you want these settings you have to copy them by hand
ERROR: couldn't find conf/params_pltfed34.dat; perhaps the calibration failed? Files will not be moved.
ERROR: pltfed1_id is not set in calibration-configuration.conf; file will not be moved