INFO - PLT FED TTCrx OK (PLL ready, dll ready, frame synced)
INFO - Set up PLT FED interface #0, base address = 0x44000000, ID = 34
INFO - Output will be stored in this file: /home/2017ColdBox/cmsplt/interface/calib/pltlevelsfast_calibration_output.txt
INFO - PLTFED channel 0-4 (mFec 7-1 hubAddress 13 roc 1)
INFO -  Levels and [separations]: BLMax: 170.188 [45.0017], 1DC: 278.604 [65.4349], 2DC: 499.042 [72.8358], 3DC: 1018.75
INFO - PLTFED channel 0-5 (mFec 7-1 hubAddress 13 roc 2)
INFO -  Levels and [separations]: BLMax: 171.375 [36.9206], 1DC: 267.75 [60.7245], 2DC: 466.104 [215.292], 3DC: 1023
INFO - PLTFED channel 0-6 (mFec 7-1 hubAddress 13 roc 3)
INFO -  Levels and [separations]: BLMax: 171.417 [39.894], 1DC: 266.917 [64.8187], 2DC: 473.917 [208.593], 3DC: 1023
INFO - PLTFED channel 0-10 (mFec 7-1 hubAddress 21 roc 1)
INFO -  Levels and [separations]: BLMax: 171.542 [24.1636], 1DC: 224.104 [18.7365], 2DC: 305.625 [14.1506], 3DC: 453.312
INFO - PLTFED channel 0-11 (mFec 7-1 hubAddress 21 roc 2)
INFO -  Levels and [separations]: BLMax: 171.896 [26.4883], 1DC: 249.208 [19.3333], 2DC: 373.917 [11.9062], 3DC: 518.875
INFO - PLTFED channel 0-12 (mFec 7-1 hubAddress 21 roc 3)
INFO -  Levels and [separations]: BLMax: 172.521 [31.1212], 1DC: 267.521 [25.3154], 2DC: 424.75 [14.9435], 3DC: 651.167
INFO - PLTFED channel 0-13 (mFec 7-1 hubAddress 29 roc 1)
INFO -  Levels and [separations]: BLMax: 174.958 [31.9886], 1DC: 258.021 [51.0719], 2DC: 430.917 [113.782], 3DC: 949.854
INFO - PLTFED channel 0-14 (mFec 7-1 hubAddress 29 roc 2)
INFO -  Levels and [separations]: BLMax: 175.104 [37.124], 1DC: 293.792 [70.895], 2DC: 547.5 [87.1448], 3DC: 1007.21
INFO - PLTFED channel 0-15 (mFec 7-1 hubAddress 29 roc 3)
INFO -  Levels and [separations]: BLMax: 173.188 [53.3795], 1DC: 272.938 [65.5997], 2DC: 501.75 [159.972], 3DC: 1023
INFO - Beginning fine timing calibration...
INFO - Timing calibration successful, all fastors are in bucket 11
INFO - Looks okay to me, writing params files to conf/
`conf/params_pltfed0.dat' -> `calib/params_pltfed0.dat'
`conf/params_pltfed34.dat' -> `conf/params_pltfed0.dat'
New settings saved in conf/params_pltfed0.dat and old settings saved in calib/params_pltfed0.dat.
ERROR: pltfed1_id is not set in calibration-configuration.conf; file will not be moved